Weidmuller WI-I/O-9-U2: Wireless Mesh I/O & Gateway User Instrukcja Użytkownika Pobierz pdf (Strona 40)

Analog Inputs

Two LEDs exist for each Differential analog input. The first LED (+) is used to indicate

the analogue input is reading a Current (mA), the second LED (-) indicates the input is

reading Voltage.

Each of the analog input LEDs will flash with increasing speed and intensity depending

on the level of the input (4mA = slow/dim and 20mA= fast/bright)

For each of the single ended analog channels, the LED indicates when the input is

reading Current or Voltage by flashing the LED with the level of the input (4mA =

slow/dim and 20mA= fast/bright).

Analog Outputs

Each Analog output has an LED in series which will indicate the output current by

increasing/decreasing the intensity of the LED. (4mA = dim and 20mA= bright)

3.2.4 Ethernet Indications

On the end plate, the Ethernet socket incorporates two LED’s These LEDs indicating

the Ethernet status

100M – GREEN LED indicates presence of a 100 Mbit /s

Ethernet connection, with a 10 Mbit /s connection the LED will

be off.

LINK – ORANGE indicates an Ethernet connection and LED

briefly flashes “off” with activity.

ETHERNET

LINK100M

(HUB)

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 125 126

Brak uwag

Weidmuller WI-I/O-9-U2: Wireless Mesh I/O & Gateway User Instrukcja Użytkownika Strona 40