Weidmuller AI8 - Multi channel signal transmitter Instrukcja Użytkownika Pobierz pdf (Strona 22)

Power Supply Requirements

Check the power supply against the model number before applying

power to the instrument. AI8 modules must be used with a suitable

mains Power Supply, ratings are as follows:

Voltage Range Nominal Voltage Maximum Power Frequency Fuse value

90-250 V AC - 14 VA 47-63 Hz 500 mA

90-250 V DC* - 14 VA -

20-35 V DC* 24 V DC 14 W (at 24 V DC) - 1 A

*Using a DC power supply that provides this voltage will comply with

the instrument’s UL/CSA listing.

Since the power supply is permanently connected, the building wiring

must be connected through a suitably marked switch or circuit breaker

in close proximity and within easy reach of an operator.

Symbols

The instrument labels use symbols in accordance with IEC61010-1:

- Consult documentation; - Direct Current; - Both direct

and alternating current;

Connections

Strip wires to 7 mm from the ends. Use a suitable ferrule for multi-

stranded wires (do not solder).

se 12-28 AWG Cu Wire rated for temperatures above 70 °C Only,

tighten to 4.5 lb-In.

For effective protection from electromagnetic noise, all signal cables

must be shielded, or located on conductive trays or in conduits.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Brak uwag

Weidmuller AI8 - Multi channel signal transmitter Instrukcja Użytkownika Strona 22