Weidmuller PMX400TMP - Display instrument for control panel Instrukcja Użytkownika Pobierz pdf (Strona 8)

Note: the analogue output calibration sequence is not shown if the

analogue output is disabled.

You can calibrate each stage in sequence or skip sections by pressing

the PGM b

utton.

When the

display shows

Action/Description

Put the instrument in setup mode and scroll through the main menu

CALIB

Press ENT to enter calibrate mode

ECALn

Press ì or Å and then ENT to select millivolt input calibration (or PGM to skip)

E=0

Apply a 0.00 mV signal and press ENT

E=10

Apply a 10.00 mV signal and press ENT

E=20

Apply a 20.00 mV signal and press ENT

E=40

Apply a 40.00 mV signal and press ENT

E=80

Apply a 80.00 mV signal and press ENT

E=200

Apply a 200.00 mV signal and press ENT

jCALn

Press ì or Å and then ENT to select CJC input calibration (or PGM to skip)

CJ=0

Apply a 0.00 mV signal to the CJC input and press ENT

Cj=60

Apply a 600.0 mV signal and press ENT

rCALn

Press ì or Å and then ENT to select Rtd input calibration (or PGM to skip)

-200C

Set the RTD simulator to -200 ˚C and press ENT

Set the RTD simulator to 0 ˚C and press ENT

400C

Set the RTD simulator to 400 ˚C and press ENT

800C

Set the RTD simulator to 800 ˚C and press ENT

OCALn

Press ì or Å and then ENT to select analogue output calibration (or PGM to skip)

I=0

Measure the current (mA) output.

Adjust using the ì and Å keys until the output is at 0.00 mA.

Press ENT.

I=20

Adjust using the ì and Å keys until the output is at 20.00 mA.

Press ENT.

E=0

Measure the output voltage.

Adjust using the ì and Å keys until the output is at 0.00 V.

Press ENT.

E=10

Adjust using the ì and Å keys until the output is at 10.00 V.

Press ENT.

CALIB

You are now back in the main menu, press PGM

SAvE

Instrument will save the new values and return to run mode

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 38 39

Komentarze do niniejszej Instrukcji

Brak uwag

Weidmuller PMX400TMP - Display instrument for control panel Instrukcja Użytkownika Strona 8

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Weidmuller PMX400TMP - Display instrument for control panel