Weidmuller RI4 - Multi channel signal transmitter / display Instrukcja Użytkownika Pobierz pdf (Strona 26)

EXIT

Micromann Multi+

RI4 Version 2.05

Alarm Sequence

3 1 2 4

Input1= 56.9ßC

Input2= 13.6ßC

AL1 SP= 100.0ßC

MV In1= 56.9ßC

AL2 SP= 15.0ßC

MV In2= 13.6ßC

A.Out1= 1.72V

MV In3= 129.1ßC

A.Out2

Disabled

Input3= 129.1ßC

Input4= 129.6ßC

2 s

ENT

EXIT

ENT

Review Mode

Prev Next

Calibration Mode

Prev Next

AL3 SP= 120.0ßC

MV Dif= 116.0ßC

AL4 SP= 100.2ßC

MV In3= 129.1ßC

AL1 SP 100.0ßC

MV In1= 56.9ßC

Raise Setpoint

ENT

Save Changes to Setpoint

Accept Alarm 1

EXIT

Accept Alarm 4

ENT

Select mode

EXIT

Return to Run mode

Lower Setpoint

Setup Mode

Prev Next

*Automatic Scrolling only

You can setup the unit to scroll automatical y

through values Input1 thru AO2 or

through the inputs on y (Input1

thru Input4).

Allowed timeouts are from 2 to 20 s.

Manual scrolling (through all the values)

sti l works as shown.

Error Messages

If one or more input wires become

disconnected, the unit will display an error

message:

Open A&B for Bsense disconnected

Open A for A disconnected

Open B for B disconnected

Open A&B is also shown with no input

connected.

2-20 s*

All Alarms Accepted

Alarm Triggered

Automatic Accept Mode

Manual Accept Mode*

Accept Alarm 2

Accept Alarm 3

*Alarm LEDs Flash until accepted

Alarms accepted automatically

and unit remains in Run mode

• Run mode

Run mode is the normal operating mode of the RI4. During run

mode the RI4 scans the inputs; calculates internal variables; updates

the display, alarm relay states and analogue outputs; and, if digital

communications are fitted, sends information to the master when

requested. It will also allow setpoint adjustment, acknowledgement

of latched alarms and review of set-up parameters via the front panel

keypad and display.

Parameter setting overview

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 35 36

Komentarze do niniejszej Instrukcji

Brak uwag

Weidmuller RI4 - Multi channel signal transmitter / display Instrukcja Użytkownika Strona 26

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Weidmuller RI4 - Multi channel signal transmitter / display